Description
TITAN POWRTWIN 12000 PLUS DI
The PowrTwin™ 12000 Plus DI with submersed foot valve creates the most efficient siphon system on the market today allowing the spraying of very heavy coatings. Additionally, our EZ swing frame makes this the most efficient and convenient to use gas hydraulic system in the market today
Configured with a submersible foot valve designed for very heavy materials, including drywall mud.
- Designed to consistently spray up to up to 500+ gallons per week
- Can power up to 6 guns
- Accurate pressure control ranges from 400 to 3600 PSI.
- Spray low viscosity primers to heavy-bodied finish paints.
- Vented hydraulic fill and dipstick is easy to access for less mess.
- Easy-remove filter takes only 3 turns to remove.
- Wrap around frame for extra strength and stability.
- Durable Cart with telescoping handle and convenient lift handles.
- Honda® Engine Overhead cam engines have greater fuel efficiency than overhead valve engines.
- Convenient pail hook
- EZ swing frame decreases spillage during paint changes and lower height (and center of gravity) of unit for easy transportation.
The PowrTwin™ 12000 Plus DI with submersed foot valve create the most efficient siphon system on the market today allowing the spraying of very heavy coatings. Additionally, our EZ swing frame makes this the most efficient and convenient to use gas hydraulic system in the market today
Configured with a submersible foot valve designed for very heavy materials, including drywall mud.
- Designed to consistently spray up to up to 500+ gallons per week
- Can power up to 6 guns
- Accurate pressure control ranges from 400 to 3600 PSI.
- Spray low viscosity primers to heavy-bodied finish paints.
- Vented hydraulic fill and dip stick is easy to access for less mess.
- Easy-remove filter takes only 3 turns to remove.
- Wrap around frame for extra strength and stability.
- Durable Cart with telescoping handle and convenient lift handles.
- Honda® Engine Overhead cam engines have greater fuel efficiency than overhead valve engines.
- Convenient pail hook
- EZ swing frame decreases spillage during paint changes and lower height (and center of gravity) of unit for easy transportation.
| GPM | LPM | 3.15 | 11.9 |
| MAX OPERATING PRESSURE | 3600 PSI | 24.8 MPa |
| MAX TIP SIZE - 1 GUN - GAS | 0.059" |
| MAX TIP SIZE - 2 GUNS - GAS | 0.040" |
| MAX TIP SIZE - 3 GUNS - GAS | 0.034" |
| MAX TIP SIZE - 4 GUNS - GAS | 0.030" |
| MAX TIP SIZE - 5 GUNS - GAS | 0.026" |
| ENGINE | 270cc Honda |
| RECOMMENDED GALLONS PER WEEK | 500+ |
| ITEMS INCLUDED | RX-Apex Non-Filter Gun, TR1 517 Tip, 3/8" x 50' Airless Hose |
| PART NUMBER - GAS | 290023 |
| PART NUMBER - ELECTRIC | 290034 |
Details
Length: |
43 |
Stand: |
No |
Manufacturer: |
Titan/Speeflo |
Product Reviews
-
BEWARE
After investing much time into which machine to purchase for the application of roof silicone and reading articles and the materials that this machine and others could push we decided on this particular unit based on the specs given and what the material requires. Complete and total waste of money. We have 150’ of hose attached and we get a stream that literally travels about 2 feet off the tip, not a fan spray, a stream as in I can literally spot with more force than with what comes out of the tip. $8000 worth of equipment, $3000 in lost wasted product. Do not purchase this machine or go right ahead, but you’ve been warned. Tomorrow I’m paying somebody to rooftop load it, gonna drop down to one 50’ hose and see what happens with that, not really expecting much. Thanks Titan and Pittsburgh Paint, y’all rock!